COMPARISON OF THE USE OF SEVERAL WELLS WITH THE GASLIFT METHOD

Authors

  • Bekjonov Rozisher Soatmurodovich Associate Professor of the Karshi Engineering Economics Institute Karshi, Uzbekistan
  • Otamurodova Saltanat Pari Otamurodovna Student of the Karshi Engineering Economics Institute Karshi. Uzbekistan
  • Urinov Fazliddin Najmiddin ugli Student of the Karshi Engineering Economics Institute Karshi, Uzbekistan

Abstract

The wellbore profile can be used for efficient use of gaslift wells as well profile for inclined wells or horizontal wells in marine conditions. In addition, it has little effect on its work even when there is high pressure and temperature in the productive layer or when there are mechanical mixtures. When there is not enough natural energy to lift the oil from the bottom of the well to the surface, the wells stop pumping. But to continue the fountain, compressed gas or air is pumped into the well with the help of NKQs. The process of gas compression is carried out using a compressor device.

Downloads

Published

2024-11-29

Issue

Vol. 30 (2024)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite

COMPARISON OF THE USE OF SEVERAL WELLS WITH THE GASLIFT METHOD. (2024). American Journal of Technology and Applied Sciences, 30, 34-37. https://americanjournal.org/index.php/ajtas/article/view/2503